Click image to view full size image
Brief Introduction
Dimension
Total Thickness H | Alloy Thickness h | Alloy Width b0 | Length L |
1.01-5.0 mm | 0.2-2.0 mm | 30-244 mm | 50-1000 mm |
Representation Method: H×h×b0×L.
Has fairly good performance in anti fatigue and load capacity. Suitable for middle speed and middle load and oil lubricated situation.
Plating mild alloy on the working surface can make high speed and middle or low load internal combustion engine’s bearings, connecting rod bushing, rocker arm bushing and pump friction plate.
Product Features
Apply to low speed and high load situation.
It can process oil groove, oil hole.
Widely used in heavy auto balance bridge bushing, main engine bush, connecting rod bushing, thrust plane, oil pump side plate, bearing and thrust washers;gears and sintering parts;bulldozer's driving or driven wheel and auto body sheets/bushing etc.
Competitive Advantages
Well and High Quality Control ,
prompt Delivery ,
Customer's Design and Logo are Welcome ,
Competitive Prices ,
Small Order Acceptable
Table of Sintered bronze Powder
Copper Alloy Powder | Particle Appearance | A.D | F.R | Mesh |
CuPb10Sn10 | ball ellipse | >4.7 | ≤ 18 | ≤ -100 |
CuPb24Sn | ball ellipse | >5.1 | ≤ 16 | ≤ -100 |
CuPb24Sn4 | ball ellipse | >5.1 | ≤ 16 | ≤ -100 |
CuPb20Sn4 | ball ellipse | >5.1 | ≤ 16 | ≤ -100 |
CuPb3Sn6Zn6 | ball ellipse | 3.5-5.0 | ≤ 28 | ≤ -100 |
CuPb7Sn7Zn3 | ball ellipse | 3.5-5.0 | ≤ 28 | ≤ -100 |
CuSn6.5P0.3 | ball ellipse | 3.5-5.0 | ≤ 28 | ≤ -100 |
This item is based on high quality, low-carbon steel as matrix, tin bronze powder sintered on its surface with several times high temperatures sintering and compact rolling. It has high anti-fatigue strength, load capacity and high shock impact resistance, widely used in connecting rod of automotive engine, gear box, engineering machinery and agricultural machinery etc.
Produce Process
Slice→Even→Clean→Spread→Pre-sintering→Pre-roll→Re-sintering→Reroll→Even→Shear→Packing
Oil Grooves
JF720 bimetal sheet strip CuPb24Sn4
